TS-3036 Oskar | TAISEN Realistic Molding, Vibrating SOFT SKIN Lifelike

TS-3036 Oskar | TAISEN Realistic Molding, Crowned-Head Realistic Dildo

Oskar leads with the widest head in the lineup — a crowned build where the first push is the main event.

Oskar makes an entrance — literally. The crown is broad, properly and memorably broad, and your body knows it the moment it presses in: a slow, deliberate stretch that asks for patience and pays it back all at once. Then the ridge passes, and there is that unmistakable moment of settling as the shaft follows like the easy half of the sentence. You don’t rush a head like this. You plan for it, breathe through it — and afterward you understand why the crown got top billing.

Features

• Meet the crown first — the widest head in the lineup turns entry into the centerpiece of every session.
• Feel the ridge announce itself — the corona ridge under the broad head delivers a defined pop as you push through.
• Let the shaft keep the stretch — behind the crown, a full-bodied shaft holds the fullness once the head is through.
• Stretch around original SOFT SKIN™ — the TPE-silicone composite TAISEN co-developed with DuPont: plush over firm, elastic, with minimal oil bleed.
• Demand the full credential list — FDA-compliant, CE and RoHS certified, odorless, with no oily residue on skin or sheets.

Why TAISEN

Oskar is molded by TAISEN — TAISEN BRAND LIMITED, the American realistic-casting brand founded in Las Vegas in 1984 and now headquartered in Colorado Springs. Ask a caster which part of a realistic mold fails first and the answer is always the head — the corona, the rim, the underside geometry. Oskar carries the widest head in the lineup, so TAISEN spent its mold budget where the tolerances are least forgiving — and the definition holds at a scale that punishes careless casting.

Care & Maintenance

Pair Oskar with a water-based lubricant only; silicone-based formulas gouge the surface of the SOFT SKIN™ composite, and the warranty has no answer for a gouge. The crown earns its own step at the sink: after rinsing him under warm running water with mild soap — motor housing kept clear of the stream — run a fingertip around the groove beneath the head, where water likes to hide, and pat the corona dry before the rest of him. Let him air-dry fully, and dust him lightly with renewing powder before long storage. Keep him in a breathable pouch, cool and shaded, away from other toys — so the crown that drew you keeps its definition.

FAQ

Does Oskar’s size change how careful I need to be with water?
Oskar’s size changes only how he is handled at the sink, not the rule: he is not rated for submersion, so rinse him section by section under warm running water with mild soap and keep the motor housing dry.

Oskar or Ignaz — which one at this price?
Oskar is the crowned build — 230mm overall with the widest head in the lineup and a 52mm maximum diameter — while Ignaz is the longer, heavier piece at 250mm with a 50mm maximum diameter and 200mm of insertable depth; a head-first session versus a long, dense one at the same price.

Any technique for taking Oskar’s wide head?
Oskar’s head rewards preparation: generous water-based lubricant, a relaxed angle, and slow pressure until the crown passes — then a pause before the shaft follows, because this realistic dildo is built around that first moment.

My door camera records every delivery — will Oskar’s parcel look like anything specific on the footage?
Oskar’s parcel looks like every other delivery on the footage: a plain outer carton with ordinary courier labels, so the recording shows a box arriving, not what arrived.